6

Ultraviolet Sweatshirt Hack

Fall is most definitely here. I adore fall. I love putting on rain boots and stomping through puddles. I love apple cakes and spiced cider. I love cuddly sweatshirts. Though I do have one cuddly-but-also-fashionable sweatshirt, there is certainly room in my closet for more. This Ultraviolet Tee hacked into a sweatshirt is a welcome addition! It’s pretty easy to draft your own sleeves to add on to the Ultraviolet Tee to make your own long-sleeve shirt or sweatshirt. Since the tee pattern has a short cut-on sleeve already, it’s really simple to just add length to the bottom. Since the shirt is a boxy style, boxy (i.e. easy!) sleeves are a well suited addition. This is what my sleeve looks like. You can make the wrist narrower or wider, depending on your style preference. It’s likely you’ll want them to be shorter (as I have very long arms). Remember …

5 Tips for Sewing a Lace Back Shirt

If you’re wondering how to sew a shirt with lace fabric in the back (like this example) or really any garment that uses lace for part of the garment, then I’ve got a few tips for you! This example is an Ultraviolet Tee sewn out of a lightweight knit front with a loosely woven lace back, but you can use these same tips to combine lace and woven or knit fabric in so many different creative ways. 1. Consider your pattern. You’ll find it easiest to sew and get the cleanest results if you select a pattern that has the fewest seamlines in the section that you would like to be lace. Each seamline is a place where you need to finish or hide the edges of the lace (since you can see through the lace to see the seam allowance on the inside) so the fewer times you need …

Boho Kimono (Ultraviolet Tee Hack)

The era of my life where summers were all about music festivals is over, but I hope I’ll never be too old to enjoy setting up some portable speakers and having a private dance party in my garden. Of course one must dress for the occasion (even if it’s a rather small affair), so I whipped up this little kimono style topper using a hack of my Ultraviolet Tee pattern. I used a lightweight floral print poly that I originally intended to be for purse linings (and has actually lined a few Presidio Purses I’ve made) but it was the lightest floatiest thing I had in my stash and it just seemed to fit the bill. I figured it wouldn’t get too sweaty since the topper is so loose and open. To hack your own, take the Front pattern piece and draw a line straight from the edge of the …

4

Simple Summer Linen Dress

Isn’t it delightful when a few different long-percolating ideas can come together? I’ve had this lovely embroidered linen in my stash for a bit. It was a gift from a friend who bought it for me at Mood when she was in New York last year (or the year before?). She was texting me photos while she was there and I thought it was just to share the excitement but much to my delight one of the cuts of fabric made it my way! I knew that it needed to be a simple garment since pattern matching was not going to be possible given the irregularity of the embroidery and the amount of fabric I had. After releasing my Ultraviolet Tee I brainstormed a list of ways I could hack the pattern and turning it into a dress was definitely on the list. I browsed through my wall of fabric …

Lengthening the Ultraviolet Tee (High Drama Option 2)

With just a little bit more work (than the standard easy way to lengthen the Ultraviolet Tee) you can have a shirt that is high drama. By keeping the side the same length but lengthening the scoop on the front and back, you get belly and bum coverage with quite a bit of sexy sass. To make the high-drama lengthening, draw a new lengthen line through the middle of the curve at the bottom (instead of using the one that is included with the pattern) (Step 1). Cut the Front and Back pieces through the line and separate them your desired length (the example shown is 2-3″) (Step 2). Redraw the curve by gently connecting the point an inch above the cut to an inch below the cut (Step 3).¬†Remember that you use the circle to match the side seams and you want the center front of your shirt to …

Lengthening the Ultraviolet Tee (option 1)

If you’re not keen on the “slightly cropped” aspect of View A of the Ultraviolet Tee¬†(or if you have a particularly long torso) but you want to keep the gentle curve on the front and back and the scoop on the side, this is how you go about lengthening your pattern pieces. This is also the same process for lengthening View B. Since the pattern pieces are essentially straight at the sides, it’s just about as easy as can be to make the pattern longer. 1 – Cut the pattern along the lengthen/shorten line on both the Front and Back. 2 – Separate the pattern pieces the amount you would like to lengthen the shirt. 2-3 inches will bring the shirt down to a non-cropped length (like the sample shirt pictured in this post). 3 – Connect the pattern pieces and fill in the gap.