All About Bias Tape (and How to Make Your Own)

It’s true that it’s generally easier to just buy a package of pre-made bias tape, but we don’t sew our own clothes because it’s easy, do we? I like to make my own bias tape most of the time because I can get a perfect color match and I can match the weight, hand, and fiber content of the main fabric. Pre-packaged bias tape is generally a cotton-poly blend and is pretty stiff. That might be just fine if you’re putting a Hong Kong finish on the seams of a denim jacket, but if you have a cotton voile or a silk crepe de chine blouse, it’s going to add a stiffness that you won’t want. What is bias tape? Bias tape is simply a strip of fabric that is cut on a 45 degree angle (for a “true bias” because it has the most mechanical stretch). If you’re used …


How to Sew a Neckline with Bias Tape

Bias tape is a lovely way to cleanly finished necklines on woven garments. They aren’t hard to sew, they just require some attention to detail and I’ll walk you through those details step by step! These same instructions can be used to finish any garment opening so if you are wondering how to sew an armhole with bias tape or how to sew a hem with bias tape, keep reading! If the pattern you are using doesn’t have a template for your bias strip or instructions on how long to cut the bias tape, carefully measure the opening on your garment. Remember to measure on your seamline (which in this case will be 1/4″ in from the edge of the fabric) and not on the edge of your fabric. Use the very edge of your tape measure to measure the distance instead of laying it flat. Cut your fabric the …


How to Invisibly Bias Tape Arm Holes or Necklines

UPDATE 2017: I’ve updated and greatly expanded this tutorial so pop over here to read the new one! This is a simple technique for invisibly finishing arm holes or necklines using bias tape (seen above on the arm hole of my Pink Peplum Brocade Top. For the technique used to pipe the neckline, click here).


5 Tips for Using a Bias Binding Foot

I have an assortment of specialty sewing machine feet, most of them given to me by my mom (thanks, ma!). I’ve been working on a project that has involved a LOT of bias tape. So, I’ve been using my bias binding foot. If you have a foot yourself (or plan on getting one, or are just curious to know a little more), I’ve put together a list of tricks that I figured out while sewing with this foot. 1. Use a seam ripper to help you thread the tape into the machine.┬áThe first step is to thread your bias tape into the bias tape foot. I found this quite frustrating initially as I couldn’t get it through the other end enough to get a grip on it. So, I turned to my seam ripper. When I got the tape close to the end of the feeder I stabbed the seam …